Materials:
* Fabric (remember to prewash all fabrics)
* 9"x9" of reinforcement
* Plastic Mirror
* Glue gun and glue stick
* Sewing machine/thread/scissors
* For the top flaps, cut four rectangles of fabric (two of the front fabric and two of the back fabric) with the following dimensions: 4 3/4" x 5 1/8", 4 3/4" x 4 3/8", 4 1/2" x 7 1/4" (You should have 12 rectangles)
* For the inner layer of flaps, cut two rectangles of fabric (one of the front fabric and one of the back fabric) with the following dimensions: 4 7/8" x 8", 4 1/8" x 8"
* Using the template, with the smaller rectangles first (inner layer), place the front fabric right side up on the page and place a pin on the sides that need to be sewn
* Place the back fabric of the rectangles over the fronts with right sides together and pin the sides that need to be sewn, then sew the two layers together with a 3/8" seam allowance
* Do the previous two steps for the larger rectangles (top layer)
* Turn the rectangles right side out and iron
* Sew around the edge for a finished look
* Cut your mirror into a 6" square
* On your 9" square of reinforcement, measure and mark 1 7/8" from one side (this will be the
binding side), then from the opposite side, measure and mark 1 1/8", from the top and bottom, measure and mark 1.5"
* Put a few lines of glue in the middle of the square you just made then center your mirror and press on to attach
* Cut two 9" x 4" strips, one 9" x 4 3/4" strip and one 9" x 3 1/4" strip
* Fold each of these strips in half lengthwise and iron
* Sew along the fold for a finished look
* Place each strip on the page in the appropriate spot (there should be a half inch overlap of the mirror), then pin and sew to page coming as close as you can to the mirror without hitting it
For more pages and some tips visit my Quiet Book page